Home » American Eagle® Products / Hydraulic Pressure Intensifiers
Hydraulic Pressure Intensifiers
A Hydraulic Pressure Intensifier is used to power hydraulic tools for the service truck industry. A dual circuit machine, operators can operate a single function tool such as a bead breaker while also being capable of operating a dual function tool that offers two ports.
The HPI-10K is a Hydraulic Pressure Intensifier used to power hydraulic tools and jacks for the tire service, utility, mechanics truck and emergency vehicle industry.
The HPI–10K utilizes the hydraulic flow from a host truck or independent power unit to power the HPI-10K. The HPI-10K produces dual circuit hydraulic flow of .5 GPM to 2 GPM @10,000 PSI to operator selected hydraulic tools. Because the HPI-10K is a dual circuit machine, operators can operate a single function tool such as a bead breaker or small ram while also being capable of operating a dual function tool such as a large jack or ram that offers two ports.
Control of the HPI-10K is done through a standard radio remote control that allows the operator to control hydraulic flow in increments of 25%, 50%, 75%, or 100%. The HPI-10K is the only hydraulic pressure intensifier on the market with a radio remote that allows the operator to adjust the flow without returning to the unit. This means the operator can stay as near or as far from the tool as they deem necessary.
The HPI-10K also offers manual controls on the unit as well as pressure gauges showing the output pressure going to each tool.
The HPI-10K includes an independent 5-gallon reservoir with return filter. This system design keeps tool hydraulic oil isolated from the host vehicles hydraulic system.
This unit will produce 10,000 PSI of hydraulic working pressure for hydraulic jacks and rams. Connecting directly into crane’s hydraulic system, it has a 4-gallon of hydraulic oil supply dedicated for tools and will eliminate the agony of air line freeze up and the hassle of trying to keep extra air pots warm by rotating in and out of the heated cab in order to complete a job.
This unit will produce 10,000 PSI of hydraulic working pressure for hydraulic jacks and rams. Connecting directly into crane’s hydraulic system, it has a 4-gallon of hydraulic oil supply dedicated for tools.
Control of the Super Charger is done through a programmable remote for single or double functions, that includes a manual override.
- Will operate with a minimum of 6 gpm or a maximum of 40 gpm of hydraulic flow
- Will operate with a minimum of 2500 PSI to a maximum of 4500 PSI working pressure
- Pressure and flow will self-regulate
- Will operate on 12 or 24 volt system
- Equipped with a 12 or 24 volt thermostatic controlled heat element to maintain warm hydraulic oil
- All models standard with adjustable flow to the tool
- Has an in-line filter on return line from the tool to the supply tank